We spent many hours on research to finding refrigerator temperature controller dual replacement, reading product features, product specifications for this guide. For those of you who wish to the best refrigerator temperature controller dual replacement, you should not miss this article. refrigerator temperature controller dual replacement coming in a variety of types but also different price range. The following is the top 10 refrigerator temperature controller dual replacement by our suggestions
587 reviews analysed
1. Inkbird ITC-308 Max.1200W Heater, Cool Device Temperature Controller, Carboy, Homebrew, Fermenter, Greenhouse Terrarium Temp. Control
Feature
- [Convenient Design] Plug and play design, easy to use. Support °C/°F display.
- [Dual Relay Output] Be able to connect with refrigeration and heating equipment at the same time.
- [Dual Display Window] Be able to display measured temperature and set temperature at the same time.
- [Buzzer Alarm] High and low temperature alarms are available when the temperature is over or the sensor is with issue.
- [Warranty & Safe] Warranty: 1 year. Maximum output load: 1100W(110V). It is with temperature calibration and compressor delay which can protect your refrigeration.
Description
Specification:
Temperature Control Range: -50~99°C / -58~210°F
Temperature Resolution: 0.1°C / 0.1°F Temperature Accuracy: ±1°C (-50~70°C) / ±1°F (-50~160°F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Body Dimension: 140x68x33mm (5.5×2.7×1.3inch)
Socket Dimension: 85x42x24mm (3.3×1.7x1inch)
Ambient Temperature: -30~75°C / -22~167°F
Storage Temperature: -20~60°C / -4~140°F
Humidity: 20~85% (No Condensate)
Warranty: 1 Year
Package Included:
1x ITC-308 Temperature Controller
1x Manual
2. Inkbird ITC-308 Digital Temperature Controller Outletsmoker Thermostat, 2-Stage, 1100W, with Sensor Reptile Beer Brewing Kegs Fridge Cured Meat Breeding
Feature
- Plug and play design, easy to use
- Dual relay output, be able to connect with refrigeration and heating equipment at the same time
- Support reading with Centigrade or Fahrenheit unit
- Maximum output load: 1100W(110V)
- Dual display window, be able to display measured temperature and set temperature at the same time
3. bayite Temperature Controller 1650W BTC211 Digital Outlet Thermostat, Pre-wired, 2 Stage Heating and Cooling Mode, 110V – 240V 15A
4. bayite Temperature Controller BTC201 Pre-Wired Digital Outlet Thermostat, 2 Stage Heating and Cooling Mode, 110V – 240V 10A
5. bayite AC 110V Fahrenheit Digital Temperature Controller 10A 1 Relay with Sensor
Feature
- KEEP TEMPERATURE IN DESIRED RANGE: It’s on/off control mode. Turn on your device at a degree and turn it off at another degree. The difference of the 2 degrees can be minimum 1 and maximum 25.
- HEATING OR REFRIGERATION WORKING MODE: Switch between heating mode and refrigeration mode according to the device your need.
- LONG SENSOR CABLE: 3m/9.8ft. Size of the WATERPROOF probe head: 4mm*20mm
- WIDE RANGE OF USES: seedling heat mat, home brewing, aquarium, pet breeding, incubation, BBQ, fermentation, accelerating germination, electric radiator, electric oven, etc.
- With compressor delay protection function for refrigerating control
Description
This is an AC 110V Fahrenheit Digital temperature controller. It can control the power to a freezer to prevent it from getting too cold, or control the power to a terrarium to prevent it from getting too hot, maintain a stable environment.
This controller provides heating and cooling modes and temperature alarm function.
For example:
If you choose heating mode, set control Value to 100°F, set span value to 10°F. The relay will be connected when temp drop to 90°F. The relay will be disconnected when temp reaches 100°F;
If you choose cooling mode, set control Value to 100°F, set span value to 8°F. The relay will be connected when temp reaches 108°F. The relay will be disconnected when temp drops to 100°F
Specification:
1.Power supply for the controller: AC 110V, 50/60Hz
2.Temperature unit: Fahrenheit, Measure range: -4 ~ 220°F
3.Temperature measure resolution: 1
4.Accuracy: ±0.5
5.Working mode: Heating OR Cooling mode
6.Slew range of temp controlling: 1 – 25(Max temp span between ON and OFF)
7.Control resolution: 1(Minimum temp span between ON and OFF)
8.Power consumption: less than 3W
9.Relay contact capacity: 10A/250VAC, 10A/110VAC
10.Data retention: Yes
11.Compressor delay protection: YES
12.Product size:8.5*7.5*3.5cm / 3.4*3*1.4in
13.Sensor Cable length: 3m/9.8ft
Package Content:
1x Digital Temperature controller
6. Inkbird 10A 110V Digital Thermostat with Heat and Cool Relays ITC-308 Home Brewing
Feature
- [Convenient Design] Plug and play, easy to use.
- [Reading Mode] Support reading with Centigrade or Fahrenheit unit.
- [Safe] Maximum output load: 1100W(110V).
- [Dual Relay Output] Be able to connect with refrigeration and heating equipment at the same time.
- [Dual Display Window] Be able to display measured temperature and set temperature at the same time.
7. Inkbird Digital Outlet Heat Temperature Controller with Day Night Control for Brewing Aquarium Breeding Reptiles Hatching Heat Mat
Feature
- ????????【Convenient Design】 Plug and play, easy to use. Support reading with Centigrade or Fahrenheit.
- ????????【Dual Display Window】 Be able to display measured temperature and set temperature at the same time.
- ????????【Only Heating】 Temperature Control Mode: On/Off Control. Please note it is only heating controller without cooling function. Both of the plugs can control the heating. But totally could not over 1200W.
- ????????【Dual Time Cycle Setting】Can be set different temperature from day and night on the basis of the physical needs of animals and plants during 24 hours.
- ????????【Different Functions】Temperature calibration, over-temperature and sensor fault alarm. Maximum output load: 1200W (110V).
8. Inkbird ITC-1000F 2 Stage Temperature Controller Cooling and Heating Modes Celsius and Fahrenheit
Feature
- ????????There are two relays. Switch between cooling and heating modes. Support for °F / °C display.
- ????????Overheat Protection of Home Appliances, hatching, Seedling pads, constant temperature Circulation and other Electrical Appliances.
- ????????By setting the temperature set-point and the difference between the temperature set-point and the difference.
- ????????Alarm when temperature is out of limit or sensor is wrong.
- ????????Switch between refrigeration and heating modes, temperature calibration.
9. bayite DC 12V Fahrenheit Digital Temperature Controller 10A 1 Relay with Sensor
Feature
- Simplified Design—Easy to set. Support °F display
- One Relay Output—Switch between heating mode and refrigeration mode according to the device you plug into the controller. Maximum output load: 1100W(110V)
- Safe Protection—High and low temperature alarms are available when the temperature overshoots your desired temperature. Compressor delay protection time setting and Temperature calibration
- Warranty—1 year warranty for replacement or full refund without return. Comes with a 3m(9.8ft) waterproof probe sensor. Measure range is -4 ~ 212°F
10. Inkbird Dual Stage DV 12V Digital Temperature Controller Fahrenheit Thermostat Heating and Cooling for Homebrewing Brew Fermenter Fridge Incubator Greenhouse
Feature
- ????????Fahrenheit and Celsius Display Can Be Choose
- ????????Alarm When Temperature Exceeds the Limit or When Sensor Error
- ????????2 Relays, Switch Between Cooling and Heating Modes
- ????????Control the Temperature by Setting the Temperature Set Value and the Difference Value
- ????????Temperature Calibrating, Refrigerating control output delay protection
Conclusion
By our suggestions above, we hope that you can found Refrigerator Temperature Controller Dual Replacement for you.Please don’t forget to share your experience by comment in this post. Thank you!
