Nowadays, there are so many products of nature poer mppt charge controller in the market and you are wondering to choose a best one.You have searched for nature poer mppt charge controller in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings nature poer mppt charge controller which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
689 reviews analysed
1. EPEVER 40A MPPT Charge Controller, 12V/24V Max 100V 1040W Input Negative Grounded Regulator, Fit for Gel Flooded Sealed Lithium Battery
Feature
- 1. 40A Charge Controller, Negative Ground Design, control your solar energy charge and discharge your battery in safe range
- 2. System voltage ratings 12, 24 Vdc
- Fit for GEL, Sealed, Flooded, Lithium Batteries
- Controller’s tracking efficiency no less than 99.5%, the maximum conversion efficiency of system performance is 98%.
- 3. Digital Meter Display with backlighting—-easy to see operating data and working condition, Real-time energy statistics function with Multiple load control modes(manual mode, light ON/OFF, light On+Timer and Light on/off+Dual time control).
- 4. 40amps solar charge controller, Max input power 520W(12V)
- 1040W(24V) solar pannerl, Max. solar array Voc 100 V
- And also fit for small load application, e.g. Fan, LED
- 5. Die-cast aluminum design and nature cooling, 3 stage charging for maximum battery life with intelligent power saving and temperature compensation.
2. SUNER POWER Waterproof 10A Solar Charge Controller – Intelligent12V/24V Solar Panel Battery Regulator
Feature
- Optimized charging algorithm and charge stages make sure the battery is fully protected and working more efficient.
- Over charge protection, over discharge protection, over load protection, reverse protection.
- Photocell Control & Work time setting according to personal requirements, practical and useful.
- IP65 Waterproof design, compatible with SUNER POWER SP sereis solar panel kits including SP-20W/SP-30W/SP-50W and other brands solar panels with stander SAE connector as well.
- Extended 12 months warranty + 24/7 professional life-time technical support.
Description
The controller is a new series of intelligent, multi-purpose solar charge controllers. Its innovative structured design makes it easy to install and more reliable to use. Optimized charging and discharging management enables the service life of batteries to be greatly boosted. What’s more, various light control can be flexibly set to fully meet your various application requirements.
The waterproof intelligent charge controller features PWM (Pulse Width Modulation) technology to help maintain higher charging efficiency. Build-in over charge protection, over discharge protection, reverse protection, over-load protection, more safety for using, suitable for home, industrial, commercial etc.
Features
Adopting brand MCU chip to realize fast intelligent control and ultra-low standby power consumption;
The series PWM circuit is used for charging, and the three-stage charging algorithm is improved to improve the charging efficiency;
LED charge and discharge status indicator, battery power indicator, the status is clear;
Waterproof design of aluminum shell to prevent components from oxidizing into water, effectively prolonging the service life of controller;
Has the battery under-voltage, over-voltage, output overload, battery, solar panel anti-back connect and other protection functions.
3. PowMr Solar Charge Controller 12V/24V Auto, 50A Solar Panel Battery Controller 50Amp PWM Solar Regulator with Dual USB LCD fit for Small Solar System
Feature
- 50A Solar Charge Controller 12V / 24V Auto work
- Max input voltage: 45V
- Max PV power 550W /in 12V, 1100W / in 24V. With Dual 5V / 2A max.
- Three Load work mode (Settable), 【1-15H】and 【0H】both belong to the light control mode, and the load will turned off at dawn. 【24H】Load output 24 hours (except for battery under voltage) 【1-15H】Load on after sunset and closed after setting hours (turn off load after dawn) 【0H】Dusk to dawn (the load will turned off at dawn)
- Solar Charge Controller 50 amps only suitable for lead acid batteries: OPEN, AGM, GEL and Seal, not for nickel hydride, lithium, Liions, or other batteries.
- For protecting the lifespan of your battery, once the voltage of the battery drop below 9V, the solar controller will turn off automatically. Only suitable for small home solar system,
- Easy to install and operate: Please always connect the battery before connect the solar panel, only suitable for small home solar system.
Description
Parameters:
Batt voltage: 12V/24V auto
Charge current: 50A
Discharge current: 50A
Solar open voltage: < 23v="" @="" in="" 12v="" battery="" 45v="" @="" in="" 24v="" battery="">
When using a PWM charge controller, it is recommended that the PV panels be connected in parallel, preferably not in series. The series voltage easily exceeds the maximum input range.
Max input power: 550W /12V system, 1100W/24V system
(The input power of the PWM controller should not exceed 75% of the controller, which can extend the life of the controller.)
Battery type: GEL,LEAD-ACID,FLOODED
Load Mode:
a. 【24H】 hours
b.【1-15H】 hours
c. 【0H】hour
【1-15H】and 【0H】both belong to the light control mode, and the load is turned off after dawn.
Float charge: 13.7V(defaul,adjustable)
Discharge stop: 10.7V(defaul,adjustable)
Discharge reconnect: 12.6V(defaul,adjustable)
USB output: 5V/3A
Self-consume: <>
Operating temperature: -35~+60 degree
Features:
12V/24V auto work
LCD screen display
Two USB output
Easy operation interface
PWM charging mode
short-circuit protection
Battery reverse discharge protection
Battery reverse polarity protection
open-circuit protection
Overload protection
Warm Tips:
1. Always connect the battery before connect the solar panel, disconnect in reverse order.
2. Make sure your battery has enough voltage for the controller to recognize the battery voltage
3.DO NOT connect any inverters, generator or battery charger into the charge controller. If an inverter is to be connected to the system, connect the inverter directly to the battery.
Package:
1.1X 50A Solar Charge Contorller
2.1X English User Manual
4. 5A Waterproof Solar Charge Controller 6V 12V Auto, 5 amp Solar Panel Charging Regulator IP67 Waterproof 24Hours Load on for Lead-Acid (AGM Gel Seal Foolded) Battery
Feature
- Mini Size solar controller Waterproof for small power system, IP67 Waterproof Rating make it suit for Outdoor Use
- Battery Voltage: 6V / 12V auto
- Rated Charge & Discharge Current: 5A
- Maximum power of solar panel: 30W for 6V battery, or 60W for 12V battery
- Easy to install and operate
- Load On 24 Hours
- Smart PWM technology, high efficiency
- Prevent the battery from over charging, over discharging and Reverse discharging to solar panel during nights
- IP67 Waterproof Rating make it suit for Outdoor Use like: Boat, water pump, Control landscape Lights and Water Feature
Description
Notice:
New type: 5A solar controller waterproof for 6V or 12V battery, please connect battery first.
Please always connect the battery before connect the solar panel, disconnect in reverse order!
Function:
1. Prevent the battery from over charging, over discharging and Reverse discharging to solar panel during nights.
2. Easy to install and operate, Load On 24 Hours, Smart PWM technology, high efficiency.
Your Satisfaction is our Highest Priority, please kindly contact us via email firstly if you have any question with our this solar panel controller, we will always standby and try our best to help you solve the problem, thank you.
Specifications:
Waterproof IP67
Rated Voltage:DC 6V/12V
Max input VOC: 11V(6V) / 22V(12V)
Max Current:5A
Power of solar panels: 30W (5A,6V)/60W (5A,12v)
Max Solar input voltage: 22V
Float:13.8V
Charge reconnect: 6.5V (6V) / 13V (12V)
Discharge stop: 5.6V(6V) / 11.2V(12V)
Discharge reconnect: 6.3V(6V) / 12.6V(12V)
Working Temp:-10- +40degree;
Weight:33g
Package:
1Pcs 5A WATERPROOF Solar Charge Controller(No come with manual)
What type of connectors on the wire ends?
Just plain wire, no connectors
Q:Why does the controller stop charging from the solar panel?
A:Disconnect, measure the voltage of the battery, and see if the controller is fully charged. If it enters the floating state, the controller will stop charging the solar panel and charge the battery with a weak current to maintain the battery loss.
Q:Why did the load stop working after working for a while?
A:Use a multimeter to measure the battery voltage. If the voltage of the battery reaches the voltage value of the low voltage disconnection, the controller will disconnect the output of the load terminal to prevent the battery from excessively consuming power.
5. FANCY NOVA 30A Solar Charge Controller, Solar Panel Controller 12V/24V PWM Auto Paremeter Adjustable LCD Display Solar Panel Battery Regulator with Dual USB Port
Feature
- 【Easy to Use】 Solar charge controller comes with a big LCD display that can clearly indicate the status and data, it can be conveniently switched modes and parameter configuration.
- 【Widely Used】 Solar panel suitable for solar power system, solar street lamp, smart home, solar light box, intelligent irrigation,camping lantern etc.
- 【Precautions】The solar regulator is only suitable for lead acid batteries:OPEN, AGM, GEL, not for nickel hydride, lithium, Liions, or other batteries.
- 【Mutiple Electric Protection】short-circuit protection,open-circuit protection,reverse protection,over-load protection, more safty for using, suitable for home, industrial, commercial etc.
- 【Satisfaction Guarantee】Fancy Nova Solar charge Controller provide 100% satisfaction guarantee: 30 days hassle free money back, an 12-month warranty.You can get it immediately!
Description
Features:
1. Automatically manage the working of solar panel and battery in solar system.
2. Easy to set up and operate.
3.Solar Charge Controller Suitable for solar power system, solar street lamp, smart home, solar light box, intelligent irrigation,camping lantern.etc.
4. Protection from lightning strike and high speed charging.
5. Prolong the battery life cycle and keep the load work well.
6. Overloading and short-circuit protection.
7. Suitable for small solar energy system.
Specifications:
– Batt voltage: 12V/24V auto
– Charge current: 30A
– Discharge current: 30A
– Max Solar input: <>
– Equalization: B01 sealed 14.4V
– B02 Gel 14.2V
– B03 flood 14.6V
– Float charge: 13.7V(defaul,adjustable)
– Discharge stop: 10.7V(defaul,adjustable)
– Discharge reconnect: 12.6V(defaul,adjustable)
– USB output: 5V/3A
– Self-consume: <>
– Operating temperature: -35~+60 degree C
Package Include:
1X 30A Solar Charge Contorller
1X English User Manual
Note:
<1>Please keep it in cool and well ventilated place to maintain good heat dissipation.
<2>Make sure your battery has enough voltage for the controller to recognize the battery before first installation.
6. ALLPOWERS 20A Solar Charger Controller Solar Panel Battery Intelligent Regulator with USB Port Display 12V/24V
Feature
- ►Rated Discharge Current: 20A
- USB Output Voltage: 5V/3A
- Battery Voltage: 12V/24V auto. Adjustable power rate with dual USB ports
- 3-Stage(Bulk, ABS, Float) charge management and 4-Stage PWM charge. Please notice the controller might be power off if the battery voltage is too low.
- ►Functionality: Equipped with industrial-grade STM 8 microprocessor to control the charger and discharge process and it has reliable battery to charge and discharge period management
- ►Mutiple Electric Protection: Over-current and short-circuit protection, inverse connection protection, low voltage and overcharge protection
- ►Good Heat Dissipation: Dual mosfet reverse current protection, low heat production(ALL electronic components generate heat when they are running,it is better to shelter them for better heat dissipation, avoid direct sunlight exposure or damp place)
- ►Easy to Use: Comes with a display that can clearly indicate the status and data, it can be conveniently switched modes and parameter configuration, suitable for home, industrial, commercial etc. Warranty only against products from ALLPOWERS. Any items ordered from other sellers, ALLPOWERS will not be responsible for the After-Sales.
7. Nature Power 70500 Wind Turbine with MPPT Charge Controller, 400-Watt,Black
Description
The Nature Power 12V 400 Watt Wind Turbine harnesses the energy of wind to create clean, renewable energy for your home, cabin, farm, work sites or anywhere standard power is to expensive or not available. This wind generator is used to charge 12 volt batteries and mounts on any 1.5 inch Schedule 40 pole. Constructed from lightweight, weatherproof cast aluminum and marine grade paint coating, this renewable energy generator can withstand the harshest of environments. The unit can begin generating power with at a low 7 mph wind and reaches maximum power of 400 watts or 27 amps at 28mph. Built in cut-out system prevents from going over the rated output and being damaged. The carbon fiber composite blades ensure low wind noise. Blade Diameter (in.): 46, Blade. Dimensions L x W x H (in.): 26 x 42 x 42, Assembly Required: Yes. Mounting Pole not included.
8. 20A Solar Charge Controller Solar Panel Battery Intelligent Regulator with Dual USB Port 12V/24V PWM Auto Paremeter Adjustable LCD Display
Feature
- ☀☀☀20A Solar Charge controller : Binen solar charger controller are UL 1741 certified,the solar charger controller compatibility with 12V 24V system. Discharge Current: 10A,build-in industrial micro controller, automatically manage the working of solar panel and battery in solar system. Dual USB output 5V/2.5A (max), to support mobile phone chargeing.
- ☀☀☀Multiple Protection Functions: Binen solar controller has short-circuit protection, open-circuit protection,reverse protection, over-load protection. Fully 3-stage PWM charge management, improve system efficiency and prolong the life span of the battery.
- ☀☀☀Battery Type: The charge regulator is only suitable for lead-acid batteries: OPEN, AGM, GEL, it is not suited for nickel hydride, lithium, Liions, or other batteries. For protecting the lifespan of your battery, once the voltage of the battery drop below 8V, the solar controller will turn off automatically.
- ☀☀☀LCD Display: Comes with a display that can clearly indicate the status and data, it can be conveniently switched modes and parameter configuration, suitable for home, industrial, commercial etc.
- ☀☀☀Easy to Install and Operate: The charge controller should connect the battery first, then the solar panel, and finally the load! The disassembly sequence is contrary to the wiring order.Dual mosfet Reverse current protection, low heat production. ( Note: The charge controller will heat up when it is running. Please be careful to install the charger controller on a flat, well-ventilated place)
9. SmartSolar MPPT 100/30 Charge Controller
Conclusion
By our suggestions above, we hope that you can found Nature Poer Mppt Charge Controller for you.Please don’t forget to share your experience by comment in this post. Thank you!