907 reviews analysed
1. Deep Power Wing Nut Driver – Slot Wing Nuts Drill Bit Socket Wrenches Tools Set for Panel Nuts Screws Eye C Hook Bolt, 1/4" Hex Shank
Feature
- This drills nut driver bit designed to tighten or loosen wing nuts, bolts, hooks quickly and effectively when installing hurri shutters/panels or doing other projects, and saves lots of your time and get your job done more faster.
- Just pop it into a power screwdriver and get the wingnut / shutters installed without concern about spraining your thumbs by using other hardware tools, saves wears and tears on your fingers.
- Quickly to tighten simply turn the wing nut by power drill. your Impact Driver or Drill you drive just about any wing nuts bolt or C head Eye hook screw up to 5x faster than you can by hand.
- This nuts tools A must have for hurricane Snowstorm prone areas
2. PAGOW 2-Pack Hurricane Wingnut Driver – Wing Nut Drill Bit Socket Tool, 1/4" Hex Shank for Panel Nuts, Screws Eye C Hook & Q-Hanger, Steel
Feature
- This wingnut driver designed to tighten or loosen wing nuts, bolts, hooks quickly and effectively when installing hurricane shutters/panels or doing other projects, and saves lots of your time and get your job done more faster.
- Just pop it into a power screwdriver and get the wing nut / shutters installed without concern about spraining your thumbs by using other hardware tools, saves wears and tears on your fingers.
- This Steel wing nut driver is a perfect tool that works with any power drill (1/4 inch hex shank). The total length of the tool is about 6.55cm(2.6 inch)
- the outer diameter of the socket is about 17.8mm(0.7 inch)
- and the slot cutout is 4mm(0.157 inch) wide.
- This little wing nut driver is made from CR-V steel, highly strong and sturdy.
3. PAGOW Upgraded Large Slotted Hurricane Wingnut Driver – Wing Nut Drill Bit Socket Tool, 1/4" Hex Shank for Panel Wing Nuts, Screws Eye C Hook & Q-Hanger, Steel
Feature
- This wing nut driver has a big slot with more than 7.5mm (0.3 inch) wide, which’s bigger than other wingnut drivers, if you are looking for a big one using for thick wingnuts, this is it. And it’s also fit for common wingnuts, not just thick one.
- Designed to tighten or loosen wing nuts, bolts, hooks quickly and effectively when installing hurricane shutters/panel, matches with any power drill with 1/4 inch hex shank.
- A must have for hurricane prone areas, up to 5x faster than you can by hand, save your time when hurricane is coming.
- Made from CR-V steel, which is highly strong and sturdy for long time use.
- PACKAGE INCLUDE: 1-pack big wing nut driver.
Description
PAGOW Upgraded Large Slotted Hurricane Wingnut Driver – Wing Nut Drill Bit Socket Tool, 1/4″ Hex Shank for Panel Wing Nuts, Screws Eye C Hook & Q-Hanger, Steel
Function
This wingnut driver is designed to tighten or loosen wing nuts, bolts, light hanger hooks quickly and effectively when installing hurricane shutters/panels or other DIY projects like Christmas lights,string lights etc, which saves lots of your time and gets the job done more faster.
Dimensions
Length: 78mm(3.1 inch);
Outer Diameter: 24mm(1 inch)
Drill bit slot is 7.5mm(0.3 inch) wide
Suitable for Q shaped light hanging hooks up to 4mmHow To Use
Just pop it into a power screwdriver and get the wing nut / shutters installed without concern about spraining your thumbs by using other hardware tools, saves wears and tears on your fingers.
100% Customer Service Satisfaction
If you have anything concerned with the wing nut driver, please first to choose contact us and we will take care of it for you.here is how Find your order in your amazon account, click the ” contact seller” button beside the order ID.
4. PANOVOS (2pc) Power Wing Nut Driver Set,Slot Wing nuts Drill Bit Socket Wrenches Tools Set,1/4" Hex Shank Drills Bits for Panel Nuts screws eye C hook bolt
Feature
- 2pcs in a package – This drills nut driver bit designed to tighten or loosen wing nuts, bolts, hooks quickly and effectively when installing hurri shutters/panels or doing other projects, and saves lots of your time and get your job done more faster.
- quickly to tighten simply turn the wing nut by power drill. your Impact Driver or Drill you drive just about any wing nuts bolt or C head Eye hook screw up to 5x faster than you can by hand.
- Just pop it into a power screwdriver and get the wingnut / shutters installed without concern about spraining your thumbs by using other hardware tools, saves wears and tears on your fingers.
- This wing nut driver is a perfect tool that works with any power drill (1/4 inch hex shank). The total length of the tool is about 6.55cm(2.6 inch)
- the outer diameter of the socket is about 17.8mm(0.7 inch)
- and the slots on the drill bit tool is 4mm(1.55 inch) wide.
- Hurricane Wing Nuts Driver Set A must have tools for hurricane/Snowstorm protection for windows doors hardware
5. Simpson Strong Tie H2.5A 18-Gauge Hurricane Tie 100-per Box
Feature
- Designed to provide a connection between trusses/rafters and the top plate of the wall to resist high-wind/seismic forces
- Also suitable for connecting 2X deck joists on top of a perpendicular beam
- Install in pairs on either side of the rafter/truss/joist to provide resistance to uplift and lateral forces
- Made from 18 gauge steel
- Galvanized for extra corrosion resistance
Description
Joist hangers are designed to provide support underneath the joist, rafter or beam to provide a strong a connection. Simpson strong-tie offers a diverse line of hangers to handle almost any application with top flange, concealed flange and field skew able and slope able options. The hurricane tie series features various configurations of wind and seismic ties for trusses and rafters. Install with 8D common nails or #9 x 1-1/2 in. Strong-drive sd screws.
6. 2 Pack Deep Power Wing Nut Driver, Slot Wing Nuts Drill Bit Socket, Wrenches Tools Set for Panel Nuts Screws Eye C Hook Bolt, 1/4" Hex Shank
Feature
- Package include: 2 Pack Deep Power Wing Nut Driver
- This drills nut driver bit designed to tighten or loosen wing nuts, bolts, hooks quickly and effectively when installing hurri shutters/panels or doing other projects, and saves lots of your time and get your job done more faster.
- Just pop it into a power screwdriver and get the wingnut / shutters installed without concern about spraining your thumbs by using other hardware tools, saves wears and tears on your fingers.
- Quickly to tighten simply turn the wing nut by power drill. your Impact Driver or Drill you drive just about any wing nuts bolt or C head Eye hook screw up to 5x faster than you can by hand.
- This nuts tools A must have for hurricane Snowstorm prone areas
7. Prime-Line H 4106 Crank Handle, 3/8 in. Spline Socket, White, Fits Andersen Casement Operators
Description
Product Description
This swivel style crank handle fits older Andersen brand casement operators. It is constructed of zinc diecast and comes in a white painted finish. This crank features a large bell base that fits Andersen’s older style operator cover shape, and it has a 3/8 in. spline socket with a 3-1/8 in. projection/reach.
From the Manufacturer
This swivel style crank handle fits older Andersen brand casement operators. It is constructed of zinc diecast and comes in a white painted finish. This crank features a large bell base that fits Andersen’s older style operator cover shape, and it has a 3/8 in. spline socket with a 3-1/8 in. projection/reach.
8. WIDGETCO 1/4" x 1" Screw Thread Protectors, White – Works w/Many Hurricane Shutters
Description
1/4 inch x 1 inch White Screw Thread Protectors fit 1/4 inch (1/4-20) screws and bolts. Simply slide over the threaded end of the screw or bolt. Functions as a Thread Protector, Mask (for painting), Insulator, Decorator, Seal or to Color Code. Ideal for Hurricane Shutters.
9. Hillman 707322 Installation Tools Wing Nut Driver
10. Prime-Line Products 172926 Tee Handle Crank, 3/8-Inch Bore, White,(Pack of 2)
Description
Product Description
This T handle crank is constructed from diecast and comes in a white finish. It features a 3/8 In. bore size and does not interfere with blinds, shades and shutters. This type of handle replaces most crank style handles and fits on many manufacturers.
From the Manufacturer
This T handle crank is constructed from diecast and comes in a white finish. It features a 3/8 In. bore size and does not interfere with blinds, shades and shutters. This type of handle replaces most crank style handles and fits on many manufacturers.
Conclusion
By our suggestions above, we hope that you can found Hurricane Shutter Crank for you.Please don’t forget to share your experience by comment in this post. Thank you!