Top 9 Cr10 Heating Bed

UCHOOSE, a King Professional 3D printer and Printing Parts Store.
For High Quality & Good Service, We are diligent to Do Our Best!

Note: These are original replacement parts for Creality CR-10 CR-10S 300x300x400mm ;
we only guarantee our heater bed be used on the original creality 3D printer CR-10 and CR-10S; if be used to the other brand modles, customers need to afford to the resonsibility by themselves, meanwhile, our warranty will not valid for this cause.

Specifications:

> Model: 3D Printer 2 in 1 heating bed /Black Aluminum hotbed for CR-10 CR-10S 300x300x400mm 3D Printer
> Product process: Aluminum Substrate
> Hot Bed Size: 310x310x3mm
> Voltage: 12V
> Power: 220W

Package

1 × Aluminum Hot Bed 310x310x3mm With Cable Which be installed well for CR-10 /CR-10S 3D Printer

Warranty:we only guarantee our heater bed be used on the original creality 3D printer CR-10 and CR-10S;
if be used to the other brand modles, customers need to afford to the resonsibility by themselves,
meanwhile, our warranty will not valid for this cause.

This silicone heating pad with 4 pre-made screw holes as the drawing shows is designed for CR-10 3D printer building plate.

Backing:3M adhesive backing

Size: 310mmx310mm

It’s Electricity AND Heat you are coping with. We are absolutely your right choice with 100% guarantee for high quality heaters

Much safer and more reliable heat source than RepRap PCB heatbeds.

With 1meter NTC 100K 3950 thermistor for temperature Control.

Power consumption: 750W.

Attached with two pieces 1meter length power wire

Instructions：

The product is divided into two parts: the form of A+B

– Part A: The top is a matte surface (the same as other stickers), and the back is magnetic (the interaction with the front of Part B plays an attractive role)

– Part B: The top is magnetic (with the adsorption under the A part), the back is the 3M adhesive (posted on the printer platform, which plays a fixed role)

Description:

Easy removal Magnetic CR-10/CR-10S 3D printing platform for PLA filament material. To use this cr-10 bed surface, simply stick the bottom plate onto your build plate and start printing, peel up the top plate with finished prints, then peel off the top plate from the prints. Snap the top plate back into place for next round of printing.

Feature:

1. Introducing the first ever removable, magnetically secured, cr-10 build plate for hassle free model removal. Say goodbye to all those removal tools, spatulas, and knives with this genius design.
2. Flexible 3D Printing CR10 Build Plate: reusable, provides a durable and stable build surface whilst preventing model warping.

Kindly note:

1. This CR-10S Magnetic Build Surface is rated for PLA filaments ONLY. Any other filaments with high shrinkage coefficients may experience malfunction or decrease in magnetic force over time. This will not prevent your printing from warping.

2. This cr-10 build mat 300 x 300 is not for use with high-temperature printing applications above 70°C.

* With independent temperature controller .need plug with independent power * Size: 510-510mm suit for CR-10S5.
*Power consumption :Maximum power 1200W
*The maximum heating temperature 120C（Celsius Degree）
* The back with 3M adhesive glue, can directly stick to the heated bed. need disassemble the S5 bed before assemble it
* The heated bad Maximum temperature resistant is 200C, long term working temperature condition is under 180C
* This is 28 hole version, beyond 24 postion hole, extra 4 hole is for cooling
* To ensure safety , the plugs are 3 pins
* When use, please do some test to find a suitable temperature for you to use, for example, when heating pad working , if you want heat the bed to 100C, please set the silicon heater to 75-80C, no need to set to 100C, for the printer itself can heat too. this can save electricity cost and environment friendly

NOTE: This product is rated for use with PLA filaments ONLY. Any use with filaments with high shrinkage coefficients may experience malfunction or decrease in magnetic force over time. This will NOT prevent prints from warping.
NOTE: This product is not for use with high-temperature printing applications above 70*C.
NOTE: It is strongly recommended to wipe the surface with isopropyl alcohol or other low residue cleaner BEFORE use, to remove any outer layer of film or dust that has accumulated after manufacturing.
Easy removal 3D printing platform for PLA and PLA-based materials. To use it, simply stick the bottom sheet onto your build plate place, then place the top half on top of the magnetic lower and start printing, peel up the top sheet with finished prints, then flex the top sheet to make the model pop off from the build surface. Snap the top plate back into place, and you’re ready for the next round of printing.

For Other Creality CR-10S Pro Accessories:

1. Creality CR-10S Pro Motherboard: Search by B07TZP5SGZ

2. CR-10S Pro Nozzle, Creality 6-Pack M6 Thread Extruder Nozzles Copper 0.4mm: Search by B07YW7PT2S

3. Creality CR-10S Pro Heated Bed Springs (4-Pack) : Search by B07XD1KL62

4. Creality CR-10S Pro Extruder Kit Aluminum Alloy Dual Gear for CR-10 /CR-10S /Ender-3 /Ender-3 Pro: Search by B07XG13ZFG

5. Creality CR-10S Pro 24V Extruder Hot End Kit Nozzle 0.4mm with Heater Block Silicone Cover: Search by B07VZ554WN

6. Creality CR-10S Pro Full Assembled Extruder Hot End Kit with Heater Block Silicone Cover: Search by B07VVWX57D

7. Creality CR-10S Pro Original Long Distance Metal Remote Extruder Kit: Search by B07W18WRV3

Features:
This power module expansion board is a perfect assistant for your 3D printers, for better printing effects.
Suitable for Creality CR-10, CR-10S, CR-10 MINI, CR-10 S4, CR-10 S5, etc.
Compact appearance and fine workmanship.
Made of premium PCB material, high quality and durable.
100% brand new and good performance.

Specifications:
Creality 3D
Material: PCB
Quantity: 1pcs
Suitable: For Creality CR-10, CR-10S, CR-10 MINI, CR-10 S4, CR-10 S5, etc
Applicable Range(hot bed power): 300-850W
Supply Voltage: 12V/ 24V
Item Size: 5.3 * 3.8 * 2.5cm / 2.1 * 1.5 * 1in
Item Weight: 24g / 0.8oz
Package Size: 10.5 * 6.2 * 5.6cm / 4.1 * 2.4 * 2.2in
Package Weight: 56g / 2oz

Package List:
1 * Heatbed Expansion Board

Note:
Cannot be used for power supplies above 30V, be careful not to reverse.

About the Creality 3D Printer Glass Plate Heat Bed for CR-10 CR-10S
1.Better adhesion: Creality superplate covered by microporous coating, shows strong adhesion during printing.
2.High-performance: The silicon carbide glass is of chemical stability, high heat conductivity coefficient and good wear-resistance and can withstand extreme temperature.
3. Reliability: The special coating is inorganic, with its hardness of 7-8 Mohs and heat resistance up to 400 ℃.
4. Easy to clean with water or alcohol. Easy to remove your print by hand or with a scraper.
?
How to use
1.Clamp the platform to the printer’s hot bed.
2.Place the A4 paper on the platform for leveling, and the distance between the nozzle and the platform keeps the A4 paper moving freely.
3.Clean the platform surface with alcohol/water (If there is sweat or oil on the platform, which will lead to stickiness.), Suggested bed temperature may vary depends on the filament material.
4.After finish printing, the viscosity of the platform will gradually decrease as the temperature decreases, and the model can be taken after the temperature of the platform is lowered.
Temperature settings for different filaments:
PLA:50-70oC
Flexible filament: 50-70oC
ABS:100-125oC (110oC is recommended)
PC:100-130oC (120oC is recommended)
Nelon:90-120oC (110oC is recommended)
PP:100-130oC (120 oC is recommended)
PETG: 50-70oC

Specification:
Material: Special Glass + microporous coatings
Item size: 310*310*4MM/12.2*12.2*0.16IN

PLS NOTE：Move the nozzle the front/left leveling screw and adjust the platform height by turning the knob underneath(The thickness of a piece of A4 paper).
The nozzle is too far away from the platform.so that consumables can not adhere to the platform.
The nozzle is too close to the platform,and the filament are not extruded enough.even scraping the platform.