698 reviews analysed
1. Cyclone Dust Collector Dust Collection Dust Separator Shop Vac Accessories
Feature
- PROFESSIONAL SYSTEMS – Suitable for industrial extractor dust collector, for CNC machining, machinery, textile, commercial, workshops, wood working, construction, etc …
- HIGH QUALITY CYCLONE DUST COLLECTOR – Made of high quality PP material, high temperature resistant, clogging-free, extend the service life of vacuum pump.
- HIGH EFFICIENCY – Average productivity increase from 80% to 95%, The larger the dust particles, the higher the collection rate, tight sealing must be ensured during installation.
- WIDELY USE – Suitable for most brands of vacuum sweeper and dust collector, sweeps dust, wood chips, hair, concrete particles, debris and so on.
- SPECIFICATIONS – Dimensions: 13.3×8.3×7(in), Inlet and outlet Inner diameter: 1.97”/50mm, external diameter: 2.17″/55mm. Coupling Inner diameter:1.78″/45mm, external diameter: 1.97”/50mm. Color: black
2. 4" Dust Separator Cyclone Kit for Barrels, Trash Cans, Buckets or Custom Built Containers, Large Debris Falls To The Bottom Of The Can While Dust Flows To The Dust Collector
Feature
- Help protect your dust collector from unnecessary wear and tear with our unique Dust Separator DIY Kit. Two elbows and two couplers combine to give you in feed and out feed points when they are installed on a barrel, box, or any container (barrel or box not included) that you would like to capture large wood chips in.
- The separator works by simply allowing the heavy wood chips to fall to the bottom of the container, while the lighter dust particles get pulled in the out feed port and into your dust collector. This keeps the large debris from slamming into your dust collector’s impeller, which in turn prevents any unnecessary damage to the unit.
- Separating the large wood chips also keeps your dust collector bag or container from filling up so fast, this means you won’t have to empty it as often!
- The Dust Separator Kit is perfect for use with Jointers, Planers, Router Table units and more!
- Includes: 2 ea. 4″ Ports 1 ea. 4″ in feed elbow 1 ea. 4″ out feed elbow 1 ea. hardware pack 2 ea. 4″ turn key hose clamps
3. Oneida Air Systems Dust Deputy Deluxe Cyclone Separator Kit
Feature
- INCREASED SUCTION POWER – Oneida Air Systems’ Dust Deputy cyclone uses centrifugal force to capture and remove 99% of dust and debris from the air-stream before it reaches your vacuum filter, eliminating clogged filters and suction loss!
- LONGER LIFESPAN – Prevents fine dust and large debris from reaching your dust filter, reducing the need for cleanings and prolonging the lifespan of your filter. The Dust Deputy Deluxe will save you countless time and money on expensive replacement vacuum filters and dust bags, allowing you to keep working harder, longer, and safer than ever!
- EASIER WASTE DISPOSAL – Now you can easily empty your dust and debris from the bucket without ever having to open up your vacuum.
- WET OR DRY – This simple and efficient design can be adapted for use with any make, size, or model wet/dry vacuum and features tapered 2.0″ ports for secure fittings using a variety of dust collection hose sizes. Portable design can be mounted directly to the vacuum. Works with most materials: Wood dust, drywall dust, concrete dust, clay/silica dust, blasting soda, cooled ash & soot, water, metal shavings, baking flour, grass & leaves, pet/animal hair, pharmaceutical waste, and much more!
- MADE IN AMERICA – Comes with everything you need to convert your wet/dry vacuum into a two-stage, dust-free system. Including the AS cyclone, SD hose, elbow adapters, 5 gallon buckets, caster wheels, gasket, and mounting hardware.
4. Oneida Air Systems 4in Super Dust Deputy Deluxe
Feature
- Retrofits to single-stage 1/2 HP to 3 HP dust collectors
- Ultra-high efficiency with integrated air ramp and 4″ neutral-vane inlet
- Inlet Size: 4″ OD (3.75″ ID)
- Outlet Size: 4″ OD (3.65″ I.D.)
- Small 16″ footprint and assembled height under 42″
- weighs less than 12 lbs.
- Deluxe kit includes a lightweight, 15-gal. dustbin with quick-release latch
5. Woodstock W2049 Mini 2-Stage Cyclone Separator
Description
From the Manufacturer
Designed to be used with any 2-1/2-Inch diameter Shop-Vac hose, the Mini Dust Collection Separator fits over a standard five-gallon bucket. It increases the capacity and efficiency of the typical Shop-Vac by allowing heavier particles to drop out of the system before they reach the main container. Vacuum, hose, planer, stand and bucket are not included.
6. Clear Vue Cyclones CVMAX 18" diameter, 8" intake Dust Collection Cyclone kit, single phase with filters
Description
Dust separation at its finest! The CVMAX dust collection system is designed for woodworking shops running multiple machines on a regular basis. Based on the Bill Pentz cyclone design, the powerful 220 v 5HP Leeson single phase motor coupled with our 16″ backward-inclined blower generates 1,935 cfm. Sized to receive an 8″ sewer and drain PVC mainline that branches off to 6″ trunk lines running to each of your tools. Two Wynn NANO filters eliminate 99.999% of the dust down to 0.5 micron, returning the cleaned air right back to your shop! Assembly required. Brackets, collection bin and Filter Clean Out Box sold separately.
7. CV06 Mini System with Collection Bucket and Hose – dust collection and separation for shop vacuums
Description
The Clear Vue Cyclones Mini CV06 is a cyclonic pre-separator for shop vacuum systems. The inlet size receives a 2″ vacuum hose – (adapters to other shop vacuum sizes sold separately). With the benefit of extended filter life and uncompromised airflow, the Mini CV06 is a great accessory for any shop vacuum!
The Mini CV06 is a scaled version of the Bill Pentz Cyclone design that minimizes dustbin emptying and addresses the need to constantly clean and replace expensive fine filters. Traditional woodworking “cyclones” separate most of the heavy chips reducing the frequency of emptying dustbins, but traditional “cyclones” pass nearly 100% of the fine airborne particles that coats, clogs and ruins fine filters. Airborne wood dust has razor sharp edges and points that rapidly destroy filters. Traditional “cyclone” designs require constant cleaning and/or replacing expensive filters to maintain good airflow. Unlike other “cyclones”, the Mini CV06 separates heavier particles and most fine airborne dust particles. Separation of airborne dust is six times better than competing models. Independent medical school testing recorded separation rates at 99.9% of dust particles larger than 5-microns and 80% of fine dust particles sized to 0.5-microns. So little dust gets into the shop vacuum resulting in less filter cleaning or need for replacement filters. Continuous full airflow is uncompromised. The Mini CV06 is a great addition to any workshop. Used in conjunction with a shop vacuum, it is ideal for hand tool workstations and general dust clean up.
Clear Vue Cyclones was founded in 2004 as a family owned business in South Carolina. Our commitment is to provide state of the art dust collection systems and accessories, wholly manufactured in the USA.
Conclusion
By our suggestions above, we hope that you can found Bissell 2031729 Cyclone for you.Please don’t forget to share your experience by comment in this post. Thank you!