756 reviews analysed
1. BCZAMD 12V 50W Upgraded Ceramic Cartridge Heater Wire 1M 3D Printer Accessories Heating Tube 620mm for Reprap Prusa Mendel i3 MK3 MK10 Maker Select V2 3D Printer Parts V6 Hotend J-head Extruders, 3Pcs
Feature
- Apply to Creality CR-10S Pro, CR-X, Ender 3, Ender 3X, Ender-3 Pro, Anet A8, Maker Select V2.1, Monoprice v2, Wanhao Duplicator 3D Printer, V6 Volcano MK8 MK9 MK10 Extruder/Hotend etc.
- The improvement compared to ordinary red heating tube:
- 1.From the original ordinary 0.3-line high-temperature line to 0.5-line thick white high-temperature line, can bear higher temperature, and looks more beautiful.
- 2.From the original 40W power to 50W, the maximum temperature increases from 300-31℃ to 340-350℃. Can be used with the new HT-NTC100K temperature thermistor.
- 3.The new version heater used in all imported skills, the use of 304 stainless steel, with the internal use of 2080 nickel chrome wire to achieve maximum service life.
Description
After-sales guarantee: each defective item can be replacement for free or refund. If any question, please feel free to contact or QA us, we will try our best to service you
Specification
Voltage: 12V
Power: 50W
Heating head size: 6 x 20mm
Heating head material: 304 stainless steel
Line length: 39inch /1M
Line thick: 0.5 mm?2; (The cross section of the copper wire inside the heater is 0.5mm?2;)
Color: as shown in the picture
Working Temperature: < 350="">
Single-end heating tube use instructions:
1.The effective heating part of the single-end heating tube must be kept dry.
2.The electrical joint of the single-ended heating pipe should be placed outside the insulation layer and the heating chamber. The working voltage should not exceed 10% of its rated value, and the casing should be effectively grounded.
3.The working environment of the electric heating element, the temperature is not more than 95 degrees, no explosive, corrosive gas.
4.The electric heating element should be stored in a dry place and should not be damp.
Package listing:
3 x 12V 50W Ceramic Cartridge Heater
2. BCZAMD 24V 50W Upgraded Ceramic Cartridge Heater Wire 1M 3D Printer Accessories Heating Tube 620mm for Reprap Prusa Mendel i3 MK3 MK10 Maker Select V2 3D Printer Parts V6 Hotend J-head Extruders, 3Pcs
Feature
- Apply to Creality CR-10S Pro, CR-X, Ender 3, Ender 3X, Ender-3 Pro, Anet A8, Maker Select V2.1, Monoprice v2, Wanhao Duplicator 3D Printer, V6 Volcano MK8 MK9 MK10 Extruder/Hotend etc.
- The improvement compared to ordinary red heating tube:
- 1.From the original ordinary 0.3-line high-temperature line to 0.5-line thick white high-temperature line, can bear higher temperature, and looks more beautiful.
- 2.From the original 40W power to 50W, the maximum temperature increases from 300-31℃ to 340-350℃. Can be used with the new HT-NTC100K temperature thermistor.
- 3.The new version heater used in all imported skills, the use of 304 stainless steel, with the internal use of 2080 nickel chrome wire to achieve maximum service life.
Description
After-sales guarantee: each defective item can be replacement for free or refund. If any question, please feel free to contact or QA us, we will try our best to service you
Specification
Voltage: 24V
Power: 50W
Heating head size: 6 x 20mm
Heating head material: 304 stainless steel
Line length: 39inch /1M
Line thick: 0.5 mm?2; (The cross section of the copper wire inside the heater is 0.5mm?2;)
Color: as shown in the picture
Working Temperature: < 350="">
Single-end heating tube use instructions:
1.The effective heating part of the single-end heating tube must be kept dry.
2.The electrical joint of the single-ended heating pipe should be placed outside the insulation layer and the heating chamber. The working voltage should not exceed 10% of its rated value, and the casing should be effectively grounded.
3.The working environment of the electric heating element, the temperature is not more than 95 degrees, no explosive, corrosive gas.
4.The electric heating element should be stored in a dry place and should not be damp.
Package listing:
3 x 24V 50W Ceramic Cartridge Heater
3. Creality 24V 40W Heater Cartridge 620 Ceramic Hotend for 3D Printer CR-10S Pro,CR-X,Ender 3, Ender 3X, Ender-3 Pro,Prusa Mendel,Anet E10 (Pack of 5pcs)
Description
Compatible with Creality CR-10S Pro,CR-X,Ender 3, Ender 3X, Ender-3 Pro 3d printer, etc.
Cartridge Heater Description:
Cartridge heaters is consist of a cylindrical stainless steel tube and thus provide a high corrosion prevention
The heating wire inside which is wound onto a ceramic core
The number of coils varies depending on the power, and provide a great uniform distribution of heat, which considerably increases the long life of the heater as well as prevents the oxidation of the heater wire even at high temperatures
The solids, liquids, and gases need to be heated by cartridge heater, transmit heat quickly by conduction if the producer of the heat (the cartridge) is in direct contact with the heat sink (any solid, liquid, or gas)
Widely used for manufacturing plastic and rubber parts in the car industry or in the food processing industry, etc
Package Included :
5*24V Cartridge Heater with 1m wiring
4. Signstek 10 PCS Reprap 12V 40W 620 Ceramic Cartridge Heater for 3D Printer Prusa Mendel
5. Upgraded 12V 50W Heater Cartridge 6x20mm Heating Tube 1M Compatible with Ender 3 CR-10 Heating Block V6 Hotend Titan Aero Extruder 3D Printer
Feature
- Heater Cartridge size: Φ6x 20mm
- Cable length: 1meter
- Power: 12V 50W
- The probe of this blue heating tube is made of closed stainless steel sleeve, with strict package and much higher quality than the common heating tube on the market.
- The tubular heater can work in the heating medium connected at both ends, and is widely used in the medium heating equipment such as 3D Printer, mold heating, hot core box, core shooter, etc
- Package: 2piece Blue 12V 50W heater tubes
- This heater tube use high quality blue Braided cable and blue sleeve, More durable and Better discrimination
6. MK8 Extruder Hot End Part Assembled DIY Hotend, 0.4mm Nozzle 12V 40W Heater Including for RepRap、CR 10 3D Printer 1.75mm Filament
Feature
- Package include:22 pcs 3d printer nozzles (output diameter ) 22 x 0.4mm, With storage box packaging.
- COMPATIBILITY: mk8 nozzle are compatible with Anet A8, Creality CR-10, Tevo Tarantula, MK8 makerbot, duplicator, prusa i3 and reprap,Compatible with all 1.75mm ABS/ PLA 3D printer.
- Premium material: the cr10 nozzle are made of high quality brass material, Against rust or erosion,sturdy and durable, connect with M6 out thread, easy to install
- Parameter: input diameter 1.75mm
- output diameter 0.2mm, 0.4mm, 0.6mm, 0.8mm, 1.0mm
- out thread: M6,different sizes can meet your multiple needs.
- NOTE: After replacing the nozzle, please recalibrate the distance between nozzle and build plate to ensure the quality of print parts.
Description
Specifications:
Type:cr10 nozzle
Material: Brass of National standard
Out Thread: M6
Filament Diameter: 1.75mm
Output Diameter: 0.4mm
Quantity: 0.4mmX22 pcs
Compatibility: with all 1.75mm ABS/ PLA 3D printer, work well with Monoprice select mini,Prusa i3, Anet8. Installation: external M6 thread connection
Description:
How to replace nozzles ?
Step 1: Turn on 3D printer, heat the nozzle and heat block to the target temperature (PLA: 180-220, ABS: 240-280).
Step 2: After heat finishing, close printer, take spanner to hold the heat block. Then use socket screwdriver to screw old nozzle extruder out.
Notice: Please don’t touch the old nozzle and heat block to avoid scalding.
Step 3: Spanner keep to hold the hear block, use the socket screwdriver screw the new nozzle in, make sure tight.
Notice:
Small parts, please keep away from children.
7. Signswise 5pcs Reprap 24V 40W Ceramic Cartridge Heater for 3D Printer Prusa Mendel
8. PZRT 1PC 12V 50W 1M Ceramic Cartridge Heater 3D Printer Part Heating Tube 620mm Cartridge Heater for J-Head Extruder
Feature
- Heating head size: 6 * 20mm Wire Length: 100cm Voltage: 24V Power: 50W Line thick:0.5mm
- It can bear higher temperature, and looks more beautiful than the ordinary red heater. Because we choose 0.5 mm thick white line.
- It is 50W, 10W higher than the ordinary red heater.
- It has longer service time because of the use of 304 stainless steel and the internal use of 2080 nickel chrome wire.
- The Temperature measurement can be up to 350 degrees if you choose the new HT-NTC100K temperature thermistor. It¡¯s nice.
Description
Heating head size: 6 * 20mm
Wire Length: 100cm
Voltage: 12V
Power: 50W
Line thick: 0.5mm
Material: 304 stainless steel
Color: as shown in the picture
Heating temperature: up to 350 degrees
Why choose this pro:
1: It can bear higher temperature, and looks more beautiful than the ordinary red heater. Because we choose 0.5 mm thick white line.
2: It is 50W, 10W higher than the ordinary red heater.
3: It has longer service time because of the use of 304 stainless steel and the internal use of 2080 nickel chrome wire.
4: The Temperature measurement can be up to 350 degrees if you choose the new HT-NTC100K temperature thermistor. It’s nice.
Notice:
1: You should keep the effective heating part dry.
2: The electric components should be stored in a dry place.
3: The temperature in the electric components working environment should not be greater than 203 Fahrenheit degrees, there should be no explosive or corrosive gases in it.
4: Please make sure that the electrical connector of the single-ended heater are placed out of the insulation layer and heating room, and the working voltage can not exceed 10% of its rated value. The shell should be effectively grounded.
What’s in the package:
1 X Cartridge Heater
9. Happisland 5pcs NTC 3950 100K Thermistor with 1 Meter Wiring and Female Pin Head for RepRap 3D Printer Heatbed or Hot End
Conclusion
By our suggestions above, we hope that you can found 3D Printer Heating Element Geeetech Rostar 301 for you.Please don’t forget to share your experience by comment in this post. Thank you!
