Nowadays, there are so many products of 1988 force 85 hp outboard powerhead rebuild kit in the market and you are wondering to choose a best one.You have searched for 1988 force 85 hp outboard powerhead rebuild kit in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings 1988 force 85 hp outboard powerhead rebuild kit which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
900 reviews analysed
1. Ohoho Hp-80 Rebuild Repair Kit for Hiblow Diaphragms Only Air Pump Diaphragm (black)
2. MERCURY Pump KIT-Water
- Part Manufacturer: Mercury Quicksilver
- Part Number: FK1204-1
- UPC: 745061232594
- Kit is sold as shown in photos
- Please check with your local Mercury brand dealer for boat / brand / model / year cross-referencing compatibility
- Sold as seen in pictures
- Note every computer shows colors differently
- All measurements are approximate
- Hardware and instruction/installation manual not included
Boat part number 1087739 is a new water pump kit from Mercury Quicksilver, part number FK1204-1 .
Kit is sold as shown in photos.
Please check with your local Mercury brand dealer for boat / brand / model / year cross-referencing compatibility.
- Part Manufacturer: Mercury Quicksilver
- Part Number: FK1204-1
- UPC: 745061232594
Sold as seen in pictures. Customers please note every computer shows colors differently. All measurements are approximate.
Hardware and instruction / installation manual not included.
3. Paopro Air Pump Rebuild Complete Kit for Hiblow HP 80,H60
4. Quicksilver 835257Q1 Flo-Torq II Hub Kit – for Mercury/Mariner and MerCruiser Engines
- Flo-Torq II is the world’s first modular hub system for outboard and sterndrive engines
- Field serviceable: No need to miss time on the water waiting for rubber hub replacement work
- Flo-Torq hub systems cushion and protect the drivetrain from most impacts
- For use with Mercury/Mariner 40-60 HP Command Thrust, 70-250 HP, Force 90-120, and Verado 150-300
- For use with MerCruiser Alpha, Alpha One & Bravo One (under 400 HP)
Quicksilver propellers can improve the performance of any boat through the use of Flo Torq hub systems. Flo Torq hub systems are durable, provide lower unit protection and are also field serviceable.
5. Quicksilver 96148Q8 Water Pump Repair Kit- Mercury and Mariner Outboards and MerCruiser Stern Drives
- Complete Replacement Water Pump Repair Kit
- Produced to meet Mercury Marine original equipment manufacturer specifications to best protect your Mercury or Mariner outboard or MerCruiser stern drive.
- Kit contains pump housing assembly, gaskets, o-ring, plates, impeller, key, face plates, water tube guide sleeve plus gear lube fill and vent screw o-rings.
- Designed for durability to provide higher flow rates and cooling flow to protect your engine
This extensive kit fits Mercury and Mariner outboards from the 65 hp (4-cylinder) through V-6 outboards with short vane impellers. It also fits MerCruiser I, R, MR and Alpha One drives (serial number 2495186 through 0D469858). See your owner’s manual for replacement schedule. See your service manual for installation instructions. The Quicksilver brand is the leader in delivering uncompromising engine oils, parts and accessories to the marine industry for over 65 years. Quicksilver is the premier supplier of Mercury Marine Original Equipment replacement engine parts, oils, and accessories, but also works to serve all Original Equipment brands in the marine and powersports industries. It has earned a loyal following by providing the highest quality products that are tested through some of the most rigorous environments and testing procedures. No aftermarket company comes close to the level of research and design as Quicksilver; buying Quicksilver is buying performance, protection and peace of mind.
6. Craftsman 954040501 Mulch Cover 42"
Please feel free to confirm and ask if you are unsure these parts will work for your unit!
Husqvarna OEM 42″ Mulch Cover Kit 954040501
Fits most 42″ Tractor Decks
Known to fit
Craftsman LT 1000 mower with a 42” deck
craftsman Model No. 917.273820
craftsman dyt-4000 (model 917.273635)
craftsman 2000 tractor
ariens 42″ 17.5hp
craftsman (husqvarna) 3000 mower with 42 inch deck
Murray 42″ mower
Craftsman LT1000 42″
Package Dimensions16.2 x 7 x 5.3 inches
Item Weight1 pounds
Item model number954040501
7. Turning Point Propellers 11500100 MasterGuard Hub System-501,Black Black
- Propeller Hub Installation Kit
- 15-Tooth Spline Hub
- Compatible with Hustler and Express Series Propellers
- For select Force, Honda, and Suzuki & Johnson 40-150hp 15-spline shaft engines with a 4. 25″ gear case
- For select Mercury & Mariner and Mercruiser 90-300+hp 15-spline shaft engines with a 4. 75″ gear case
Replace your propeller housing with Turning Point’s 11500100 Master Guard Hub System Installation Kit #501 with 15-Tooth Spline Hub. This kit is compatible with Hustler and Express Series Propellers for select Force, Honda, and Suzuki & Johnson 40-150hp 15-spline shaft engines with a 4. 25″ gear case. It is also compatible with Hustler and Express Series Propellers for select Mercury & Mariner and Mercruiser 90-300+hp 15-spline shaft engines with a 4. 75″ gear case. Turning Point is the only company to offer Master Guard Installation kits and prop housings for 6-300+hp engines with a Lifetime Hub. Boaters save up to 38% when buying a replacement propeller housing. Master Guard hubs are Re-useable most of the time after a prop strike, and if not, they are Warrantied even if the prop is Destroyed. These hubs offer enhanced lower unit protection. Turning Point’s Master Guard Hubs are engineered to withstand typical wear and tear over time without risk of spinning or failure under normal operational use. Turning Point’s unique patented one piece hub with glass filled nylon over durable marine bronze splines eliminates failures commonly seen in multi-part “sleeve and spline” designs, and pressed-in rubber hub systems. Covered by US Patent #6, 471, 481, #6, 685, 432, #7, 717, 678 and worldwide patents with additional patents pending. Refer to manufacturer recommendations to ensure a proper fit before purchasing.
8. Quicksilver 835274Q1 Flo-Torq II Hub Kit Yamaha
Quicksilver propellers can improve performance of any boat through the use of Flo Torq hub systems. Flo Torq hub systems are durable, provide lower unit protection and are also field servicable.
9. Qiclear Marine 835257Q1 Flo-Torq II Hub Kit – for Mercury 135-300 HP, Mercruiser Alpha Bravo One Drives
- 1.These are after market products: Fit for Mercury 60-300HP propeller installation
- works with other aftermarket props also
- Reference No.835257Q1
- 2. Outstanding Quality: Outstanding Quality based on strict quality control,modular hub system for outboard and sterndrive engines
- 3.Engine Types:Fits Mercury 60-300HP,15 spline
- Please check your engine type before purchasing
- Orignal factory product fit Qiclear 13 1/4*17 and 14 1/2*19 propellers
- 4.Sold As Seen In Pictures: Hardware kits come exactly as picture showing
- Include:forward thrust washer, drive sleeve, aft adaptor,tabwasher and propeller nut,fit for Props well
- Easy and convenient to install,Good choice for replace the old or broken one and spare back up.
- 5.Service Promise: Quality and performance are guaranteed, free return is acceptable
- Please refer to below product description for details.
● Engine Application:
Fits Mercury 60-300HP,15 spline ,Replaces OEM Numbers: 835257Q1
Fits MerCruiser 120-375hp Alpha and Bravo One Sterndrives
Fit Mercury / Mariner 135-250 HP
Fit Verado 200-300 HP
Fit Mercury / Mariner 75 HP 1984 & Newer, 90 & 115 HP 1978 & Newer, 125 HP 1994 & Newer
Fits Alpha and Bravo One Sterndrives Mercury / Mariner 75 HP 1984 & Newer 90 & 115 HP 1978 & Newer 125 HP 1994 & Newer
This hub kit will fit all Mercury made propellers that accept Flo-torq II
Does not fit Mercury/Mariner 1977 and older
●Save is earn ! We offering what you want: Better price, Good Quality and Service ! We pay attention for your benefits!
10. PartsW 16 Pc Suspension Kit for Chevrolet & GMC Truck, Center Link (FOR FREE) Adjusting Sleeves Tie Rod Ends Ball Joints (Bolt On Types) Idler & Pitman Arms Sway Bars Upper Control Arms
- Important Note: Lower Ball Joints Riveted Or Bolt On Type & THE CENTER LINK IS FOR FREE
- Control Arms Come Pre-Assembled With Ball Joints & Bushings / Replacement improves handling
- Advanced corrosion protection against the harshest conditions / Precision-made performance and additional strength
- Premium alloy steel stud for strength and durability / Replacement improves handling and noise
- Dust boot is re-installed and permanently attached to reduce contamination, and increase durability and service life
Auto parts are vital to every vehicle. It is essential for every automobile in the world to carry high quality parts;
not only to run, but to safely transport families and individuals throughout their daily routines and adventures.
We want our customers to forget about any other issues once they install our parts; this is why our replacement
parts are designed to match and fit without any issues. Our quality control team makes sure only high strength
materials are used in our manufacturing process. At PartsW, we are proud to offer premium brand quality auto
parts at a fair price to our customers.
FREE Faster Delivery to the lower 48 states (about 2-5 business days)
1 Center Link (FOR FREE)
2 Adjusting Sleeves
2 Front Outer Tie Rod End
2 Front Inner Tie Rod End
2 Lower Ball Joints (Fits Models with Bolt On Types)
1 Pitman Arm
1 Idler Arm
1 Idler Arm Bracket Assembly
2 Front Sway Bar Links
1 Front Upper Control Arm and Ball Joint Assembly – Passenger Side
1 Front Upper Control Arm and Ball Joint Assembly – Driver Side
This Kit Fits:
Chevrolet Blazer 1993-1994
Chevrolet K1500 1993-1995
Chevrolet K1500 Suburban 1993-1999
Chevrolet K2500 1993-1995
Chevrolet K2500 Suburban 1994-1996
Chevrolet Tahoe 1995
GMC K1500 1993-1995
GMC K1500 Suburban 1993-1999
GMC K2500 1993-1995
GMC K2500 Suburban 1994-1996
GMC Yukon 1995-1996
-Before placing the order, please check your car model in the Amazon Fitment Filter System in the top left corner.
Please Read the notes carefully, if you have any questions please contact us.
By our suggestions above, we hope that you can found 1988 Force 85 Hp Outboard Powerhead Rebuild Kit for you.Please don’t forget to share your experience by comment in this post. Thank you!